Location; Setup - Hoshizaki STACKABLE CRESCENT CUBER KM-1800SAH/3 Instruction Manual

Stackable crescent cuber
Hide thumbs Also See for STACKABLE CRESCENT CUBER KM-1800SAH/3:
Table of Contents

Advertisement

C. Location
This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F (+7°C to +38°C); Normal
operating water temperature should be within +45°F to +90°F (+7°C to +3°C).
Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing
equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 1" clearance at rear, sides and top for proper air circulation and ease of
maintenance and/or service should they be required.
D. Setup
1) Unpack the storage bin, and attach the four adjustable legs provided to the bottom of
the storage bin.
) Position the storage bin in the selected permanent location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin by using the two universal braces and two of the
bolts provided. See Fig. .
WARNING
Fig. 2
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-1800sahKm-1800srhKm-1800srh3Km-1800swhKm-1800swh3

Table of Contents