Remote Control - RCA RS2300 User Manual

General Controls

Remote Control

EN
CD
EQ TUNER
X-BASS
TAPE
OPEN/CLOSE AUX
ON/STANDBY - Turns power on or off from standby
mode.
EQ - Selects equalizer presets.
X-BASS - Turns on or off Bass Boost.
OPEN/CLOSE - Opens and closes disc compartment.
CD - Selects CD player.
TUNER — Selects radio tuner.
TAPE — Selects tape player.
AUX - Selects external input.
REPEAT - Repeats a track, CD or all CDs in CD mode.
SHUFFLE - Turns on/off random listening in CD
mode.
FM ST • - Selects between stereo and mono sound in
FM tuner mode.
INTRO - Turns intro mode on or off to play the first 10
seconds of each track in CD mode.
MUTE - Mutes audio output.
SLEEP - Press to select the time interval in minutes
before the unit turns off.
PRESET / - Selects next/ previous preset sta-
tion. In Clock or TImer mode - Increases / decreases
the hour or minute digit.
VOL or - Decreases or Increases volume level.
STOP - In CD mode - Stops CD playback; In pro-
gram mode - Clears program; In Tape mode - Stops
tape playback.
PLAY/PAUSE
CD; In Tape mode - Plays and pauses tape playback.
4
ON STANDBY
REPEAT
SLEEP
VOL
FM ST
PRESET
INTRO
RECORD DISC SKIP
- In CD mode - Plays and pauses
SKIP BACKWARD - In CD mode - Goes to the
previous CD track and setting options; searches back-
ward through CD; In Tape mode - Rewinds tape; In
Tuner mode - Tunes down radio frequency.
SKIP FORWARD - In CD mode - Goes to the
next CD track and setting options; searches forward
through CD; In Tape mode - Fast forwards tape; In
Tuner mode - Tunes up radio frequency.
RECORD - Starts tape recording.
DISC SKIP - Skips to the next disc in CD mode.
Installing Batteries
The remote control must be inserted with 2 "AAA" or
"UM-4" or "R03" batteries prior to use. Follow the
steps below to ensure correct installation.
1. Remove the battery compartment door (located at
the back of the remote control) by sliding the com-
partment door in the direction of the arrow and then
lifting the door out and off the cabinet.
2. Before inserting the batteries, observe the polari-
ties (that is, + and -) of the battery, then relate the
polarities to the engraved diagram inside the battery
compartment. Now insert the batteries.
3. After installation of the batteries, replace the bat-
tery compartment door in place by sliding it in the
opposite direction of the arrow (the reverse of step
1).