Setting Night Mode - RCA RT2500 Quick Connect Manual

RT2500-quickstart 5/26/00 2:54 PM Page 7
Quick Connect Guide
STANDBY
MUTE
PHONES
Setting Speaker Output Levels
Press TEST/ SET UP on receiver briefly. A test tone will be generated in each speaker.
8
Rotate the MULTI JOG on the unit or press LEVEL and then left and rigth arrow buttons
9
beside OK button on the remote to adjust the level of individual speaker.
Press TEST/ SET UP again to confirm your choice.
10

Setting Night Mode

Press NIGHT button to set the Dynamic Range of different sound (like the difference in vol-
11
ume between normal voices and sounds like explosion) if you are watching a DVD at night.
There are two modes (SOFT, SOFTER) for you to choose in terms of the extend of compres-
sion.
Note: Night mode functions only when Dolby Digital enabled components are playing (e.g.
DVD, SAT).
Setup is now complete. Enjoy the DTS/ Dolby Digital entertainment brought to you by your
RCA home theater.
pending. "DTS Digital Surround", are trademarks of Digital
Theater Systems, Inc. Copyright 1996 Digital Theater Systems,
Inc. All rights reserved.
TUNING P.SCAN SURR. MODE
DVD SAT
CD FM/ AM
HOME THEATER AUDIO VIDEO RECEIVER
(optional)
Manufactured under License from Digital
Theater Systems, Inc. US Pat. No. 5,451,942
and other world-wide patents issued and
D i g i t a l
S o u n d
P r o c e s s o r
11
8 10
6 CH TEST/ SET UP PRESET EQ BYPASS
VCR-1 VCR-2
SET
DEMO
S-VIDEO
9
TV TAPE
MULTI JOG
Dolby Digital Manufactured under license
from Dolby Laboratories. "Dolby", "Pro
Logic" and the double-D symbol are trade-
marks of Dolby Laboratories. Copyright 1992-1997 Dolby
Laboratories, Inc. All Rights Reserved.
VOLUME
VCR 2
VIDEO L AUDIO R
4
EN