Table of Contents
Advertisement
THE DISH
POINTING
MENU
SCREEN
Follow these steps to obtain your dish pointing coordinates:
1.
Turn on your television and satellite receiver.
2.
Tune your television to the satellite receiver's output channel.
3.
PressMENUoSELECT on the remote or front panel to bring up
the Main menu.
4.
Use thearrows to highlight the "Dish Pointing" option, and
-then press MENU.SELECT to accessthe dish pointing screen.
NOTE: The menu screen that you see may be slightly different
from the one pictured here.
5.
Use the arrows on the remote or the front panel to highlight
"Zip Code" and then press MENUoSELECT.
6.
Enter the zip code for the dish installation location.
7.
Record the elevation
and azimuth numbers below.
Elevation
1
/
Elevation is the upl
down angle that the
dish is pointed.
Azimuth
Azimuth is side to
side direction that
the dish is pointed.
available
methods
to find your
dish pointing
coordinates.
If you
know the zip code for the locality
where the dish is being installed,
Advertisement
Table of Contents
