Before Set-Up - Viessmann Vitodens 100-W WB1B Series Installation And Service Instructions Manual

Vitodens 100-w wb1b series wall-mounted, gas-fired condensing boiler with optional on demand hot water combiplus kit
Table of Contents

Advertisement

Vitodens 100-W, WB1B Installation & Service
Mechanical Room
Installation area conditions
WARNING
Incorrect ambient conditions can lead to damage to
the heating system and put safe operation at risk.
Ensure ambient temperatures are higher than 32° F
g
(0° C) and lower than 104° F (40° C).
Prevent the air from becoming contaminated by
g
halogenated hydrocarbons (e.g. as contained in
paint solvents or cleaning fluids) and excessive dust
(e.g. through grinding or polishing work).
Combustion air for the heating process, and ventilation
of the boiler room must be free of corrosive
contaminants. To that end, any boiler must be installed
in an area that has no chemical exposure. The list to
the right indicates the main, currently known sources.
Avoid continuously high levels of humidity
g
(e.g. through frequent drying of laundry).
Never close existing ventilation openings.
g

Before Set-up

Before placing boiler in its installation location, ensure all
necessary accessories are installed.
(continued)
Sources of combustion and ventilation air contaminants.
Areas likely to contain contaminants:
- New building construction
- Swimming pools
- Remodelling areas, hobby rooms
- Garages with workshops
- Furniture refinishing areas
- Dry cleaning/laundry areas and establishments
- Auto body shops
- Refrigeration repair shops
- Metal fabrication plants
- Plastic manufacturing plants
- Photo processing plants
- Beauty salons
Products containing contaminants:
- Chlorine-type bleaches, detergents and cleaning
solvents found in household laundry rooms
- Paint and varnish removers
- Hydrochloric acid, muriatic acid
- Chlorine-based swimming pool chemicals
- Spray cans containing chlorofluorocarbons
- Chlorinated waxes and cleaners
- Cements and glues
- Refrigerant leaks
- Calcium chloride used for thawing
- Sodium chloride used for water softening salt
- Permanent wave solutions
- Adhesives used to fasten building products and other
similar items
- Antistatic fabric softeners used in clothes dryers
CAUTION
The boiler must be installed in such a way that gas ignition
system components are protected from water (spraying,
splashing, etc.) during boiler operation and service.
General Information
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents