Table of Contents
Advertisement
ERROR MESSAGE
LINE LIMIT
MACHINE ERROR
TURN POWER OFF,
THEN ON AGAIN
MEMORY FULL
MEMORY FULL.
DELETE SOME
FILES & TRY
AGAIN
NO FILES
OVERFLOW
RAM PROBLEM
ROM PROBLEM
SET 9mm
CAUSE
This message appears if you press
to delete text, press
Clear
to add a new line, or try to
New Block
add currency conversion text,
causing the number of lines in a
block to exceed the maximum
possible for the installed tape.
This message appears if you try to
recall a file or print text which
contains more lines than the maxi-
mum possible for the installed
tape.
This message appears if there is a
problem with the machine's mem-
ory.
This message appears if you try to
store a message that is too large to
fit in the available memory space
(maximum of 3,000 characters).
This message appears if there are
no empty files available when
NEW or SAVE AS (FILE menu) is
selected.
This message appears if no files
are stored in the memory when
you try to recall or delete one.
This message appears if you press
to calculate a currency
New Block
conversion, but the resulting text
exceeds 12 characters.
This message appears if there is a
problem with the machine's mem-
ory.
This message appears if there is a
problem with the machine's mem-
ory.
This message appears if a 9-mm-
wide tape cassette is not installed
when printing a label created
using a template for 9-mm-wide
tape.
ERROR MESSAGE LIST
SOLUTION
Adjust the number of lines
so that the block will not
have more than the maxi-
mum possible.
Reduce the number of
lines or install a wider
tape.
Contact your service repre-
sentative.
Delete an unwanted file to
make space for the new
one.
Delete any unwanted files
to make space for new
ones.
Store a text file before try-
ing to recall or delete one.
Change the currency con-
version setup so that the
resulting text will not
exceed 12 characters.
Contact your service repre-
sentative.
Contact your service repre-
sentative.
Install a 9-mm-wide tape
cassette.
85
Advertisement
Table of Contents
