Table of Contents
Advertisement
ERROR MESSAGE
INCORRECT
OPERATION FOR
NUMBERING
FUNCTION
INSERT CASSETTE
INTERFACE MODE
INTERFACE ERROR
INTERFACE MODE
TAPE CASSETTE
CHANGED
CAUSE
This message appears if charac-
ters in different lines or blocks are
selected as a numbering field
(NUMBER function on the
OPTION menu).
This message appears if a barcode
is selected together with other
characters as a numbering field
(NUMBER function on the
OPTION menu).
This message appears if more than
five characters are selected as the
numbering field (NUMBER func-
tion on the OPTION menu).
This message appears if no tape
cassette is installed when you try
to print text.
This message appears if an error
occurs while receiving data.
This message appears if the size of
the data being sent is larger than
the width of the installed tape cas-
sette.
This message appears if the tape
cassette is changed between the
moment that the data begins to be
received until the moment that the
print command is received.
ERROR MESSAGE LIST
SOLUTION
Adjust the numbering field
so that it only contains
characters within a single
line of a single block.
Select either the barcode
or the characters alone as
the numbering field.
Limit the numbering field
to five characters.
Install a tape cassette and
try again.
Cancel the print job, and
then try printing again.
Cancel the print job, install
the correct tape cassette,
and then try printing again.
Cancel the print job, install
the correct tape cassette,
and then try printing again.
83
Advertisement
Table of Contents
