Rear Panel Displays - Canon EOS C300 Instruction Manual

Rear Panel Displays

You can check the following information on the rear panel. This allows you to easily adjust main camera functions
like the shutter speed, white balance and ISO speed/gain even when the monitor unit is not attached to the
camcorder without having to use the viewfinder.
1 White balance (A 74)
2 Time code settings: NDF Non-drop frame (A 85)
/EXT-LOCK External time code signal locked
(A 89) / HOLD Time code display on hold
(A 86)
3 Time code (A 84)
1
4 Audio level meter (A 93, 94)
5 White balance fine-tuning (A 74)
6 ISO speed/
7 Shutter speed (A 62)/White balance
2
Shutter speed (mode set to [Speed], [Slow]
or [Off])
Shutter speed (mode set to [Angle])
Shutter speed (mode set to [Clear Scan])
White balance fine-tuning
White balance, color temperature
1
Displayed also in mode.
2
In these shutter speed modes, only the denominator is displayed -
3
Only displayed while adjusting the setting.
4
Only when an optional WFT-E6 Wireless File Transmitter is connected to the camcorder.
Adjusting the Brightness of the Rear Panel
Repeatedly pressing the
the rear panel in the following order: Backlight on (bright)
(dim) Backlight off.
5 6
1
2
3
4
Gain (A 65)
3
(A 74)
3
(A 75)
(backlight) button will change the brightness of
7 8
9
10
11
12
8 # Aperture value (A 69)
9 ND filter (A 68)
10 Approximate remaining battery time
4
11 Wi-Fi (A 49)
12 CF card status and available recording time
indicates a shutter speed of 1/100, etc.
Backlight on
Recording Video
57
1
1