Canon EOS C300 Instruction Manual page 167

Menu item
7
[Wi-Fi Remote] [Set Up New]
[Select]
[Edit]
[Camera Settings]
[Select User]
[User Setting]
8
[GPS] [Setting]
[Auto Time Setting]
[Initialize Media] [CF A]
[CF B]
[SD Card]
# [Lens Firmware]
[Firmware]
1
Not available in the [Photos] index screen.
2
The default value depends on the country/region or purchase.
3
Setting options for [Assign Button]: [(NONE)], [ONE-SHOT AF]*, [PUSH AUTO IRIS]*, [Iris Mode]*, [Iris +]*, [Iris -]*, [ND +], [ND -],
[AE Shift +]*, [AE Shift -]*, [Backlight]*, [Spotlight]*, [PEAKING], [ZEBRA], [WFM], [EDGE MON.], [MAGN.], [Color Bars], [Markers],
[LCD Setup], [VF Setup], [LCD/VF B&W], [Onscreen Display], [Add Shot Mark 1], [Add Shot Mark 2], [Add $ Mark], [Add %
Mark], [Time Code], [Time Code Hold], [Headphone +], [Headphone -], [Audio Output CH], [Audio Level], [Photo], [FUNC.],
[FUNC. Shutter], [FUNC. ISO/Gain], [FUNC. WB], [My Menu], [Initialize Media], [LENS EXCHANGE], [User Setting (NONE)].
* - # only.
The default settings are as follows. [1]: [MAGN.], [2]: [PEAKING], [3]: [ZEBRA], [4]: [WFM], [5]: [Headphone +], [6]: [Headphone -],
[7]: [MAGN.], [8]: [WFM], [9]: [EDGE MON.], [10] to [15]: [(NONE)].
4
Available in the clip index screen only.
5
Available in the clip index screen and [$ Mark] index screen only.
6
Available in the [Photos] index screen only.
7
Available only when the optional WFT-E6 Wireless File Transmitter is attached to the camcorder.
8
Available only when the optional GP-E1 GPS Receiver is attached to the camcorder.
[Reset]: Reset various camcorder settings.
[All Settings]: Resets all the camcorder's settings to default settings, except for the hour meter.
[Camera Settings]: Resets the white balance, iris (# only), ISO speed, gain, shutter speed,
[~ Camera Setup] settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp]: Allows you to set whether the tally lamp illuminates while the camcorder is recording.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator
illuminates while the camcorder is accessing a CF card or SD card.
[Genlock Adjust.]: The phase difference between the external Genlock signal and the camcorder is initially set to
0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to 1023). When setting to 1000
or more or -1000 or less, set the first field to 10 or -10, respectively.
[Clips] settings
[Title Prefix]: Determines the first 2 characters of the clip name. Combined with the [Number Setting] setting,
this constitutes the 6-character clip name.
[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, this
constitutes the 6-character clip name. Select [Set] to assign a desired number to the first clip you record or
select [Reset] to reset the number to [0001].
The numerals increase every time a clip is recorded.
[Delete Last Clip]: Deletes the last clip you recorded. This setting option will not appear if you turned the
camcorder off since recording the last clip.
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting from the left.
Submenu
For details refer to "WFT-E6 Wireless File
Transmitter - Guide for Canon Camcorders"
(PDF file).
[On], [Off]
[On], [Off]
[Cancel], [OK]
[Complete], [Quick]
–
–
Setting options
Menu Options
A
Ü
– –
Ü
–
103
Ü
–
Ü Ü
45
Ü Ü
Ü
– 35
Ü
– –
167