Canon EOS C300 Instruction Manual page 163

[ND Filter]: Displays the ND filter indicator when set to [On].
# [AF Mode]: When set to [On], displays the autofocus icon (AF) if the focus mode switch on the attached
EF lens is set to AF.
[Key Lock]: Displays the key lock icon (C) when set to [On].
[White Balance]: Displays the white balance indicator when set to [On].
# [Exposure]: Displays the exposure bar when set to [On].
# [Iris]: Displays the aperture setting when set to [On].
[ISO/Gain]: Displays the ISO speed or gain setting when set to [On].
[Shutter]: Displays the shutter speed setting when set to [On].
[Peaking]: Displays the peaking icon (J or K) when set to [On].
[Magnification]: Displays the screen magnification icon (^) when set to [On], indicating that the image on
the screen is being magnified.
[View Assist.]: Displays the view assistance icon (
# [Lens]: Displays the lens warning icon (i) when set to [On].
[Custom Display 2] settings
[Remaining Battery]: Controls when the remaining battery indicator appears.
[Normal]: Always appears on the screen.
[Warning]: Appears only when there is a warning.
[Remaining Rec Time]: Displays the remaining recording time.
[Normal]: Always appears on the screen.
[Warning]: Appears only when there is a warning.
[Rec Mode]: Displays the recording operation indicator ([STBY] in record pause mode, for example) when set
to [On].
[Genlock]: Displays the Genlock synchronization icon (U) when set to [On].
[Time Code]: Displays the time code when set to [On].
[Interval Counter]: Displays the countdown during interval recording mode when set to [On].
[SD Card Status]: Controls when the SD card status indicator appears.
[Normal]: Always appears on the screen.
[Warning]: Appears only when there is a warning.
[Bit rate/Resolution]: Displays the bit rate and resolution when set to [On].
[Frame Rate]: Displays the frame rate when set to [On].
[Character Rec]: Displays the character recording warning icon (S) when set to [On], indicating that the
onscreen displays will be recorded on the clip.
[Output Display]: Displays the output display warning icon (T) when set to [On], indicating that the
onscreen displays will be output to an external monitor.
[SDI Rec Command]: Displays the status of the SDI recording command that is being output when
[w Other Functions] > [SDI Rec Command] is set to [On].
[User Memo]: Displays the user memo icon (Q) when set to [On], indicating that a user memo will be
recorded with a clip.
[User Bit]: Displays the user bit when set to [On].
[Audio Output CH]: Displays the audio output channel when set to [On].
[Audio Level]: Displays the audio level indicator and, if activated, the audio peak limiter icon (
[Wi-Fi]: Displays the Wi-Fi icon (
) when set to [On].
) when set to [On].
Menu Options
163
) when set to [On].