Displaying The Status Screens - Canon EOS C300 Instruction Manual

Displaying the Status Screens

You can use the status screens to check the camcorder's various recording- and playback-related settings. You
can also output the status screens on an external monitor.
Operating modes:
1 Press the STATUS button.
• The status screen most recently displayed will appear unless you
turned off the camcorder or changed the operating mode. In such
case, the [Camera] status screen appears in
[Assign Button 1/2] status screen appears in
2 Push the joystick up/down or use the SELECT dial to scroll
through the status screens.
3 When you are finished, press the STATUS button again to exit
the status screens.
• Alternatively, you can press the MENU or CUSTOM PICTURE
button. Doing so will exit the status screen and open the respective menu.
,
Status screen
[Camera]
[Assign Button 1/2],
[Assign Button 2/2]
[Audio]
[Media]
[Video]
[Metadata 1/2], [Metadata 2/2]
[Battery/Hour Meter]
[/ Data 1/3], [/ Data 2/3],
3
[/ Data 3/3]
4
[GPS Information Display]
[Wi-Fi Remote 1/4] to
5
[Wi-Fi Remote 4/4]
1
# only.
2
Does not appear in the [Photos] index screen.
3
These screens appear only after a custom picture file has been selected.
4
This screen appears only when an optional GP-E1 GPS Receiver is attached to the camcorder.
5
These screens appear only when the optional WFT-E6 Wireless File Transmitter is attached to the camcorder and an active
access point has been activated with the [w Other Functions] > [Wi-Fi Remote] setting.
Description
Displays settings related to recording, such as ISO speed/gain, iris
and shutter speed increments, peripheral illumination correction
1
attached lens model information
Allows you to verify the current function of each assignable button.
Displays settings related to audio.
Displays information about the recording media.
Displays the settings for the video terminals and which special
recording mode is in effect.
Displays the user memo and other metadata that will be recorded
with clips.
Allows you to check the remaining battery time, battery life and how
long the camcorder has been in operation.
Displays the settings for the custom picture file that will be
embedded into clips.
Displays GPS information.
Displays settings related to the configuration of the optional WFT-E6
Wireless File Transmitter and the Wi-Fi network setup. For more
details, download the "WFT-E6 Wireless File Transmitter - Guide for
Canon Camcorders" (PDF file) from your local Canon Web site and
follow the instructions to complete the necessary setup.
mode and the
mode.
1
1
and
.
Displaying the Status Screens
A
Ü
– 170
2
Ü Ü
170
Ü Ü
171
Ü Ü
171
Ü Ü
172
Ü
– 172
Ü Ü
173
173,
Ü
–
174
Ü
– 175
Ü
– –
169