Video walls video processors video matrix switches extenders splitters wireless cables & accessories 4 x 4 hdmi hdbaset lite cat5e/6/7 matrix
with 3d support and bi-directional ir (21 pages)
16 x 16 hdbaset modular cat5/6/7 matrix with bi-directional ir/poe/ethernet control & local out (19 pages)
Summary of Contents for Avenview SW-VGA-5X5
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
However, like all electronic equipments, SW-VGA-5X5 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Introduction This SW-VGA-5X5 receives and amplifies up to 5 VGA inputs, perfectly switches the desired input to the VGA equipped monitor or receiver. This matrix enables the broadcast of multiple computers’ audio and video outputs to multiple displays. Any one of the inputs can be broadcasted to any or all of the outputs without introducing noticeable video quality distortion.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com...
4. Increase of Output Channels 5. Decrease of Output Channels 6. Indicator of Output Channels 7. IR Receiver 8. Power Indicator REAR PANEL 9. Audio Inputs 10. Audio Outputs 11. Video Inputs 12. Video Outputs 13. 5V DC Power 14. RS232 Control Port www.avenview.com...
“Channel 1” makes all outputs see input1. Same to the rest of the buttons. 5. Output Channel Setup: Click on this button, a quick selection table of inputs will show up. Users can therefore easily select the input video for each output. www.avenview.com...
Page 8
6. Input Channel Setup: The button will bring up the setup window for the inputs as below. www.avenview.com...
1. Connect VGA enable equipments to the outputs of VGA-VS-5X5. 2. Connect the VGA input sources to the inputs of VGA-VS-5X5. 3. Plug power adapter cable into 5V DC power jack. Use IR Remote, RS-232 serial commands, or front panel push button to switch among inputs. www.avenview.com...
Section 3: Specifications Item Description Model SW-VGA-5X5 (VGA Matrix Switch) Supported Input / Output VGA /Component Video Bandwidth 400 MHz Supported Resolutions 1080p60, WUXGA (1920x1200@60) & UXGA (1600x1200@60) Transmission HD (720p/1080i) – 65m (210ft) Audio Support Analog Stereo 5 x VGA (Component through VGA to Component Cable) Input 5 x 3.5mm Analog Audio...
Page 12
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the SW-VGA-5X5 and is the answer not in the manual?
Questions and answers