1. Manuals
  2. Brands
  3. Avenview Manuals
  4. Matrix Switcher
  5. SW-HDM3D-C6-8X8E
  6. Instruction manual

Avenview SW-HDM3D-C6-8x8E Instruction Manual

8x8 hdmi matrix switch over single cat5/6 with deep color & 3d support
Hide thumbs Also See for SW-HDM3D-C6-8x8E:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AV Connectivity, Distribution And Beyond...
8x8 HDMI Matrix Switch over Single CAT5/6
With Deep Color & 3D Support
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: SW-HDM3D-C6-8x8E
Model #: HDM3D-C6SW-R
WIRELESS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW-HDM3D-C6-8x8E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Avenview SW-HDM3D-C6-8x8E

Summary of Contents for Avenview SW-HDM3D-C6-8x8E

  • Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
  • Page 2 Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...

  • Page 3: Table Of Contents

    INTRODuCTION ..........................3 2.1 pACkAGE CONTENTS ........................4 2.2 BEfORE INSTAllATION ........................4 2.3 pANEl DESCRIpTION ........................5 2.3.1 SW-HDM3D-C6-8x8E front panel ....................5 2.3.2 SW-HDM3D-C5-8x8E Rear panel .....................5 2.3.3 HDM3D-C6SW-R front & Back panels ..................6 2.3.4 Signal level (Max (0 – 7) Min) ....................6 2.4 IR CONTROl INSRTuCTIONS ......................7...

  • Page 4: Getting Started

    • Removal, installation, and set-up service charges. SAfETy INSTRuCTIONS The Avenview SW-HDM3D-C6-8x8E HDMI Matrix Switch over Single CAT6 with full 3D Support and Ethernet has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the SW-HDM3D-C6-8x8E should be used with care.

  • Page 5: Regulatory Notices Federal Communications Commission (Fcc)

    DO NOT TAMpER WITH THE uNIT. DOING SO WIll VOID THE WARRANTy AND CONTINuED uSE Of THE pRODuCT. THE VIDEO BOARDS ARE VERy SENSITIVE TO STATIC. plEASE ENSuRE If RACk MOuNTED OR INSTAllED ON A SuRfACE, IT SHOulD BE IN A GROuNDED ENVIROMENT. www.avenview.com Page 2...

  • Page 6: Introduction

    INTRODuCTION The Avenview SW-HDM3D-C6-8x8E, HDMI Matrix with IR, full 3D Support and now Ethernet over Single CAT6 provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the eight HDMI sources to the remote displays at the same time. Through low cost Cat-5/5e/6 lAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among eight HDMI sources using the push-in button or remote control.

  • Page 7: Package Contents

    CONTENTS Before you start the installation of the MARTIx SWITCHER please check the package contents. SW-HDM3D-C6-8x8E HDM3D-C6SW-R uSER’S MANuAl INSTAllATION SOfTWARE CD IR BlASTER IR RECEIVER IR REMOTE CONTROl ul AC pOWER CORD RACk-MOuNTING kIT BEfORE INSTAllATION • put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

  • Page 8: Panel Description

    DESCRIpTION 2.3.1 SW-HDM3D-C6-8x8E Front Panel IR SENSOR: IR sensor for receiving the IR SOuRCE STATuS : Input source indicator lED commands from IR remote OuTpuT puSH BuTTON & 7-SEGMENT lED: INpuT puSH BuTTON & 7-SEGMENT lED: front front panel push buttons used to select the number panel push buttons used to select the number of of display channel &...

  • Page 9: Hdm3D-C6Sw-R Front & Back Panels

    (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! www.avenview.com Page 6...

  • Page 10: Ir Control Insrtuctions

    • IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of SW-HDM3D-C6-8x8E and all other HDMI source devices. IR Blaster IR Receiver Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.

  • Page 11: Installation Of Sw-Hdm3D-C6-8X8E

    2. Connect each HDMI CAT 5/6 output on the SW-HDM3D-C6-8x8E to respective CAT 5/6 input on the remote receiver HDM3D-C6SW-R 3. Connect IR BlASTER cable to the SW-HDM3D-C6-8x8E and direct the IR emitter to the build-in IR receiver of the sources 4.
  • Page 12 It will quit the learn Output EDID Mode if you push the “input+ (default)”button before the setting is effective The lED will show “0”“0” if the setting is success The lED will show “f”“f” if the setting is failure www.avenview.com Page 9...

  • Page 13: Rs232 & Ethernet Software Guide

    Connection Status Connect/Disconnect Button power On/Off Button EDID Button firmware update Button Network Button Mapping Button Default Reset Button In/Out Switch Button Mute Output Button 1. FW/SW VERSION BUTTON Click “ ” button to show version information www.avenview.com Page 10...
  • Page 14 5. POWER ON/OFF BUTTON Click this button to power on/off “ ” power on status (BluE): click this button to power off device (standby mode) “ ” power off status (RED): click this button to power on device www.avenview.com Page 11...
  • Page 15 “learn” button to learn default edid 2) LOAD EDID FILE TO INPUT select input click “load” button to select the edid file 3) LEARN EDID FROM DISPLAY select edid port select input click “learn” button to learn display edid www.avenview.com Page 12...
  • Page 16 “save edid on computer” to save the generated edid as a file 5) VIEW EDID CONTENT select input, or from file b) click “view” button to read the edid and analysis c) click “save as” to save the read edid as a file on computer www.avenview.com Page 13...
  • Page 17 Click “read from device” to read the device ip address Select “ethernet” and then will be a pop-up windows key in the device ip address to the pop-up windows Close the pop-up windows Click the connected button to connect www.avenview.com Page 14...
  • Page 18 10) DEFAULT RESET BUTTON Click this button to do factory default reset * The default reset process will take about 80~90 seconds 11) IN/OUT SWITCH BUTTON Click the button on the checkerboard to select input & output port www.avenview.com Page 15...
  • Page 19 Ex: all outputs select input 3 12) MUTE OUTPUT BUTTON Click the circle button to turn off output’s video and audio Ex: mute output 2 www.avenview.com Page 16...

  • Page 20: Edid Learning

    1. front panel push-in button: please refer to the operation approach\ Method A: push-in button 2. IR remote control: please refer to the operation approach\ Method B: IR remote control 3. Control Software: operation approach\ Method C: please refer to section 5.6 www.avenview.com Page 17...

  • Page 21: Specifications

    SpECIfICATIONS ITEM DESCRIPTION UNITS SW-HDM3D-C6-8x8E HDM3D-C6SW-R 8x8 HDMI Matrix Switch over CAT6 HDMI Receiver over CAT5 with 3D UNIT DESCRIPTION with 3D Support Support HDMI COMPLIANCE HDMI Deep Color & full 3D HDCP COMPLIANCE VIDEO BANDWIDTH Single link 225 MHz (6.75Gbps)

  • Page 22: Ir Control Guide

    7-Segment LED MUTE OUTPUT Mute + (Output 1~8) + Take 1. press “MuTE” button EX: MUTE 2. press number key “3” to select Output 3 OUTPUT 3 3.press “TAkE” button OUTPUT STATUS Status + 1~8(Output 1~8) + Take www.avenview.com Page 19...
  • Page 23 + D(EDID port) +1~8(Input 1~8) + Take EDID 1.press “lEARN” button EX: LEARN EDID 2.press number key “4” to select EDID port PORT INPUT 3 3. press number key “3” to select Input 3 4.press “TAkE” button F F(fail) (success) www.avenview.com Page 20...

  • Page 24: Technical Support

    Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.

This manual is also suitable for:

Hdm3d-c6sw-r

Table of Contents