Keyboard Removal - Toshiba Satellite 1800 Series Replacement Manual

FIELD REPLACEABLE UNIT DOCUMENTATION
MODEM REMOVAL
Modem slot cover M2.5x4 black flat head screw
1. Remove one M2.5x4 black flat head screw securing
the modem slot cover.
2. Insert the case separator into the notched side of the
cover and lift up to release the two latches securing
the left side of the modem slot cover.

KEYBOARD REMOVAL

Keyboard holder
1. Open the display panel.
2. Remove the Keyboard holder at the top of the
keyboard.
Satellite
1800 Series
Latch
TOSHIBA
Tough Enough for Today's World
TM
M2x4 brass screws
RJ11 Jack
3. Remove the glass tape securing the RJ-11 jack cable.
4. Remove two M2x4 brass screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
6. Remove the RJ-11 jack from the modem board.
M2.5x2.6 black screws
3. Remove two M2.5x2.6 black screws securing the
keyboard.
Modem