Keyboard Removal - Toshiba Satellite 1130 Series Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

KEYBOARD REMOVAL

M2x2 black flat head screws
3. Remove two M2x2 black flat head screws
securing the keyboard.
.
TOP COVER REMOVAL
M2.5x6 black flat head screws
1. Remove two M2.5x6 black flat head screws securing
the LCD assembly.
Satellite
1130 Series
Keyboard
TOSHIBA
Tough Enough for Today's World
TM
Keyboard cable
JP10
4. Lay the keyboard as shown above. Make sure to
put an insulator between the LCD and the keyboard.
5. Disconnect the keyboard cable from JP10 on
the system board.
6. Lift out the keyboard.
Left/Right hinge covers
M2.5x3 black flat head screws
2. Remove two M2.5x3 black flat head screws
securing the left/right hinge covers.
Keyboard