Keyboard Removal - Toshiba Satellite A10 Series Field Replaceable Unit Documentation

FIELD REPLACEABLE UNIT DOCUMENTATION

KEYBOARD REMOVAL

Keyboard holder
1. Open the display panel.
2. Using the case separator, unlatch the keyboard holder
as shown above.
KEYBOARD REMOVAL
Keyboard support plate
6. Lift out the keyboard and set it on the palm rest.
7. Remove one M2.5x8 black flat head screw securing the
keyboard support plate.
8. Lift out the keyboard support plate.
Satellite
A10 Series
Keyboard
M2.5x8 black flat head screw
TOSHIBA
Tough Enough for Today's World
TM
M2.5x4 black flat head screw
Keyboard
holder
plate
M2.5x2.8 black flat head screws
3. Remove two M2.5x2.8 black flat head screws
securing the keyboard.
4. Remove one M2.5x2.8 black flat head screw
securing the keyboard holder plate.
5. Lift out the keyboard holder plate.
Keyboard cable
9. Lay the keyboard as shown above.
10. Disconnect the keyboard cable from PJ3200
on the system board.
11. Lift out the keyboard.
PJ3200