Modem Board Removal; Keyboard Removal - Toshiba Satellite 5100 Series Replacement Manual

FIELD REPLACEABLE UNIT DOCUMENTATION
MINI PCI CARD REMOVAL
PCI clips
3. Disconnect the black and white coax cables from
the mini PCI wireless LAN card.
4. Gently press out the Mini PCI slot clips and pull the
Mini PCI wireless LAN card out of the connector on
a 30 degree angle.
NOTE: The mini PCI wireless LAN card is optional
for the 5100 series.

MODEM BOARD REMOVAL

M2x3 black screws
3. Disconnect the MJ harness from JP1 on the modem
board.
4. Remove two M2x3 black screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
Satellite
5100 Series
Black/white
mini coax
Wireless LAN card
Modem
MJ Harness
TOSHIBA
Tough Enough for Today's World
TM
MODEM BOARD REMOVAL
Modem slot cover M2x3 black flat head screws
1. Remove one M2x3 black screw securing the
modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.

KEYBOARD REMOVAL

Latch
Keyboard holder
1. Open the display panel.
2. Remove the keyboard holder at the top of the
keyboard.