Keyboard Removal - Toshiba Satellite 3000 Series Replacement Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

KEYBOARD REMOVAL

Case separator
1. Open the display panel.
2. Using the case separator, unlatch the keyboard holder
at the top of the keyboard.
KEYBOARD REMOVAL
Keyboard cable
JP5
4. Lift out the keyboard and set it as shown above.
5 Disconnect the keyboard cable from JP5 and IPS switch
cable from JP4 on the video board and lift out the
keyboard.
Satellite
3000 Series
Display
panel
Keyboard
holder
Keyboard
IPS switch
cable
JP4
TOSHIBA
Tough Enough for Today's World
TM
Wireless switch
Board
switch
M2.5x3 silver screws
3. Disconnect the control switch/LED board cable
from the keyboard holder.
4. Remove four M2.5x3 silver screws securing the
keyboard clip.
Note: When reinstalling the keyboard holder, make sure
that the wireless switch is latch properly to the control
switch board switch.
CONTROL BOARD REMOVAL
Control
switch
board
M2.5x3 black screws
1. Remove four M2.5x3 black screws securing the
control switch board.
2. Disconnect the control switch/LED board from JP4
on the main PCB.
Control board cable
JP1
Keyboard holder