Ford SUPER DUTY 2015 Owner's Manual page 296

Note: Make sure the jack fits onto the flat
area on the outboard side of the differential.
E162804
Front passenger side (4x4)
Note: View shown from the rear of the
vehicle to clearly identify the jack point.
Place the jack directly under the axle.
E162805
Rear
Note: Jack at the specified locations to
avoid damage to the vehicle.
Super Duty (), enUSA
Wheels and Tires
Jacking the Vehicle
E162811
1.
2. Remove the lug nuts with the lug
3. Replace the flat tire with the spare tire,
4. Lower the wheel by turning the jack
5. Remove the jack and fully tighten the
6. Stow the flat tire. See Stowing the flat
7.
8. Unblock the wheels.
293
Turn the jack handle clockwise until
the wheel is completely off the ground
and high enough to install the spare
tire.
wrench.
making sure the valve stem is facing
outward for all front wheels and single
rear wheel vehicles. If you are replacing
an inboard rear tire on dual rear wheel
vehicles, the valve stem must be facing
outward. If you are replacing the
outboard wheel, the valve stem must
be facing inward. Reinstall the lug nuts
until the wheel is snug against the hub.
Do not fully tighten the lug nuts until
the wheel has been lowered.
handle counterclockwise.
lug nuts in the order shown. See
Technical Specifications (page 299).
or spare tire if the vehicle is equipped
with a spare tire carrier.
Stow the jack, jack handle and lug
wrench. Make sure the jack is securely
fastened so it does not rattle when
driving.