Lenovo ThinkCentre Hardware Maintenance Manual page 93
Machine types: 4162, 4163, 5041, 5042, 5044, 5046, 5051, 5052, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5060, 5061, 5062, 5063, 5064, 5065, and 5066
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Figure 19. Removing the heat sink and fan assembly
8. Lift the failing heat sink and fan assembly off the system board.
Notes:
a. You might have to gently twist the heat sink and fan assembly to free it from the microprocessor.
b. When handling the heat sink and fan assembly, do not touch the thermal grease on the bottom of it.
9. Position the new heat sink and fan assembly on the microprocessor socket and then position the
clamp on the plastic retention bracket. Pivot the handle
the plastic retention bracket.
Figure 20. Replacing the heat sink and fan assembly
.
Chapter 8
Replacing FRUs (Machine Types: 4162, 5041, 5044, 5051, 5053, 5055, 5057, 5059, 5061, 5063, and 5065.)
1
to clamp the heat sink and fan assembly to
87
Advertisement
Table of Contents
