Lenovo ThinkCentre Hardware Maintenance Manual page 115
Machine types: 4162, 4163, 5041, 5042, 5044, 5046, 5051, 5052, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5060, 5061, 5062, 5063, 5064, 5065, and 5066
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover to access the system board components. See "Removing the computer
cover" on page 106.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 107.
4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
Figure 42. Pivoting the drive bay assembly upward
5. To lower the drive bay assembly, press the drive bay assembly clip
assembly downward as shown.
Figure 43. Lowering the drive bay assembly
.
Chapter 9
Replacing FRUs (Machine Types: 4163, 5042, 5046, 5052, 5054, 5056, 5058, 5060, 5062, 5064, and 5066.)
1
inward and pivot the drive bay
109
Advertisement
Table of Contents
