Lenovo ThinkCentre Hardware Maintenance Manual page 86
Machine types: 4162, 4163, 5041, 5042, 5044, 5046, 5051, 5052, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5060, 5061, 5062, 5063, 5064, 5065, and 5066
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Note: If the PCI card is secured in place by a retaining latch
the PCI card from the latch. Then, grasp the PCI card by the edges and carefully pull it out of the
slot. If necessary, alternate moving each side of the PCI card a small and equal amount until it
is completely removed from the PCI card slot.
Figure 10. Removing the PCI card
• If you are installing a PCI card, open the PCI card latch and remove the appropriate PCI card slot
cover. See "Locating parts on the system board" on page 73 to identify the types of PCI card slots.
5. Remove the new PCI card from its static-protective package.
6. Install the new PCI card into the appropriate PCI card slot on the system board. Then, pivot the PCI card
latch to the closed position to secure the PCI cards.
80
ThinkCentre Hardware Maintenance Manual
1
, press the retaining latch to release
Advertisement
Table of Contents
