Lenovo ThinkCentre Hardware Maintenance Manual page 91
Machine types: 4162, 4163, 5041, 5042, 5044, 5046, 5051, 5052, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5060, 5061, 5062, 5063, 5064, 5065, and 5066
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Note: You might also need to release the power supply assembly cables from some cable clips or ties
that secure the cables to the chassis.
4. Lay the computer on its side and remove the four screws that secure the power supply assembly. Then,
slide the power supply assembly to the front of the chassis.
Figure 17. Removing the power supply assembly screws
5. Pivot the power supply assembly as shown and then lift the power supply assembly to remove it
from the chassis.
Figure 18. Removing the power supply assembly
6. Make sure that the new power supply assembly is the correct replacement. Some power supply
assemblies automatically sense the voltage, some power supply assemblies are voltage specific, and
some power supply assemblies have a voltage-selection switch. If your power supply assembly has
a voltage-selection switch, make sure that you set the voltage-selection switch to match the voltage
.
Chapter 8
Replacing FRUs (Machine Types: 4162, 5041, 5044, 5051, 5053, 5055, 5057, 5059, 5061, 5063, and 5065.)
85
Advertisement
Table of Contents
