Lenovo ThinkCentre Hardware Maintenance Manual page 135
Machine types: 4162, 4163, 5041, 5042, 5044, 5046, 5051, 5052, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5060, 5061, 5062, 5063, 5064, 5065, and 5066
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
2. Remove the computer cover. See "Removing the computer cover" on page 106.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 107.
4. Note the location of the four screws
assembly upward.
Figure 67. Pivoting the drive bay assembly
5. Hold the hard disk drive and remove the four screws that secure the hard disk drive. Then, remove the
hard disk drive from the drive bay assembly and disconnect the signal cable and the power cable from
the rear of the hard disk drive to completely remove it from the chassis.
Figure 68. Removing the hard disk drive
.
Chapter 9
Replacing FRUs (Machine Types: 4163, 5042, 5046, 5052, 5054, 5056, 5058, 5060, 5062, 5064, and 5066.)
1
that secure the hard disk drive. Then, pivot the drive bay
129
Advertisement
Table of Contents
