Horizon Fitness CLUB SERIES CST3.5-4.5 User Manual page 6

A SS EM BLY ST EP 5 - A
������������
���������
������
A SS EMB LY ST EP 5 - B
�������
����
10
CST3.5-4.5 Treadmill Rev0.2.indd 10-11
(C ST3.5 m odel)
A Slide the HANDLEBAR SLEEVE onto
the bottom of the HANDLEBAR
�������
EXTENSION.
���������
B Slide the HANDLEBAR EXTENSION
���������
���������
onto the CONSOLE HANDLEBAR.
C Insert BOLTS (?) into HANDLEBAR
EXTENSION.
��������� D Insert BOLT (?) through bottom
hole of HANDLEBAR EXTENSION
��������
into CONSOLE MAST.
E Tighten all HANDLEBAR
EXTENSION bolts.
F Slide HANDLEBAR SLEEVE all
the way down on HANDLEBAR
EXTENSION to cover BOLT (?).
G Repeat on other side.
( C ST 4.5 m odel )
A Slide the LONG HANDLEBAR
EXTENSION onto the CONSOLE
�������
��������� HANDLEBAR.
B Insert BOLTS (?) into LONG
HANDLEBAR.
C Align the lower part of the LONG
HANDLEBAR with the center of the
���������
CONSOLE MAST.
����
���������
D Insert BOLTS (?) through bottom
holes of LONG HANDLEBAR into
CONSOLE MAST.
���������
E Tighten all LONG HANDLEBAR
bolts.
F Repeat on other side.
ASSEMBLY STEP 6
������������������
��������
�������
�����������
���������
���������
POWER SWITCH
CIRCUIT BREAKER
YOU'RE FINI SHED!
A Slide PLASTIC COVER CAPS over
SUPPORT BARS.
B Slide SUPPORT BARS into side
MOUNTING BRACKETS and line up
with top MOUNTING BRACKETS.
C Insert 2 BOLTS (?) into the tops
and 2 BOLTS (?) into the bottoms
of each SUPPORT BAR.
D Slide PLASTIC COVER CAPS down
to cover BOLTS (?).
E Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'on' position, so that
the switch is lit. You will hear a
beep and the console will light up.
11
4/21/05 11:22:41 AM