Related Documentation - IBM BladeCenter HX5 Installation And User Manual

Release
buttons
A set of blank labels for your blade server comes with the BladeCenter chassis.
When you install the blade server in the BladeCenter chassis, write identifying
information about the blade server on a label. Then place the label on the
BladeCenter chassis bezel. See the documentation for your BladeCenter chassis for
recommended label placement.
Important: Do not place the label on the blade server itself or in any way block
the ventilation holes on the blade server.

Related documentation

Use this information to identify and locate related blade server documentation.
This Installation and User's Guide contains general information about the blade
server, including how to install supported optional devices and how to configure
the blade server. The following documentation is also available:
v Problem Determination and Service Guide
v Safety Information
v Warranty Information
v Environmental Notices and User Guide
Release
handle
Release
handle
This document contains information to help you solve problems yourself, and it
contains information for service technicians.
This document contains translated caution and danger statements. Each caution
and danger statement that appears in the documentation has a number that you
can use to locate the corresponding statement in your language in the Safety
Information document.
This document contains information about the terms of the warranty.
This document contains translated environmental notices.
3
Chapter 1. Introduction