IBM BladeCenter HX5 Installation And User Manual page 90

3. Copy and unpack the ASU package, which also includes other required files, to
4. After you unpack ASU. Use the following syntax:
80
IBM BladeCenter HX5 Type 7873, 7872, 1910, and 1909: Installation and User's Guide
Note: IBM provides a method for building a bootable media. You can create
a bootable media using the Bootable Media Creator (BoMC) application from
http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=TOOL-BOMC&brandind=5000016. In addition, the
Windows-based and Linux-based toolkits are also available to build a
bootable media.
the server. Make sure that you unpack the ASU and the required files to the
same directory. In addition to the application program (asu or asu64), the
following files are required:
v For Windows-based operating systems:
– ibm_rndis_server_os.inf
– device.cat
v For Linux-based operating systems:
– cdc_interface.sh
asu set SYSTEM_PROD_DATA.SysInfoProdName m/t_model[access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum s/n [access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag asset_tag[access_method]
Where:
m/t_model
The server machine type and model number. Type mtm xxxxyyy, where
xxxx is the machine type and yyy is the server model number.
s/n The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the
serial number.
asset_method
The server asset tag number. Type asset
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
[access_method]
The access method that you select to use from the following methods:
v Online authenticated LAN access. Use the following syntax:
[host imm_internal_ip] [user imm_user_id][password imm_password]
imm_internal_ip
The IMM internal LAN/USB IP address. The default value is
169.254.95.118.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is
PASSW0RD (with a zero, not the letter O).
Note: If you do not specify any of these parameters, ASU uses the default
values. When the default values are used and ASU is unable to access the
IMM using the online authenticated LAN access method, ASU automatically
uses the following unauthenticated KCS access method.
The following commands are examples of using the user ID and password
default values and not using the default values:
Examples that do not use the userid and password default values: