Installing The Cisco Microsoft Windows 2000 Usb Driver; Installing The Cisco Microsoft Windows Vista Usb Driver - Cisco 1900 series Hardware Installation

Chapter 5 Cable Connection Procedures for Cisco 1900 Series Routers
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. See
Step 6
for the USB console port turns green, and within a few moments the Found New Hardware Wizard
appears.
The USB console is ready for use.
Step 7

Installing the Cisco Microsoft Windows 2000 USB Driver

This procedure shows how to install the Microsoft Windows 2000 USB driver.
Obtain the file cisco_usbconsole.zip from the Cisco.com web site and unzip it.
Step 1
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
Step 4 The Ready to Install the Program window appears, Click Install.
Step 5 The InstallShield Wizard Completed window appears. Click Finish.
Step 6 Connect the USB cable to the PC and router USB console ports. See
for the USB console port turns green, and within a few moments a series of Found New Hardware
Wizard windows appear.
The USB console is ready for use.
Step 7

Installing the Cisco Microsoft Windows Vista USB Driver

This procedure shows how to install the Microsoft Windows Vista USB driver.
Obtain the file cisco_usbconsole.zip from the Cisco.com web site and unzip it.
Step 1
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
Note
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. See
Step 6
for the USB console port turns green, and within a few moments a pop up window stating "Installing
device driver software" appears.
OL-19084-01
Connecting to a Console Terminal or Modem
Table 5-1 on page
Table 5-1 on page
Table 5-1 on page
Cisco 1900 Series Hardware Installation
5-5. The EN LED
5-5. The EN LED
5-5. The EN LED
5-7