Horizon Fitness ASCENT TRAINER AT1501 User Manual page 4

D I AGR AM AN D P A RT S L I S T
HEART RATE HAND GRIPS
UPPER HANDLEBAR
INCLINE BRACKET
TOP HAND RAIL
SWING ARM BRACKET
SWING ARM CAP
SWING ARM
FOOT PAD
BASE RAIL BRACKET
BASE RAIL BRACKET CAPS
TOOLS INCLUDED
Phillips Screwdriver
c
5 mm T Wrench
c
5 mm L Wrench
c
6 mm L Wrench
c
13/15 mm Flat Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.

AT1501_Rev.2.6.indd 6-7
WATER BOTTLE HOLDER
FRONT STABILIZER TUBE
PARTS INCLUDED
1 Console 2 Upper Hadlebars
c c
1 Console Mast 2 Lower Handlebars
c c
1 Water Bottle Holder 2 Swing Arm/Pedal Arm Sets
c c
1 Main Frame 4 Swing Arm Caps
c c
1 Front Stabilizer Tube 2 Link Arms
c c
1 Base Rail 2 Elbow Cover Sets
c c
4 Base Rail Bracket Caps 2 Rear Uprights
c c
2 Footpads 2 Top Hand Rails
c c
1 Audio Adaptor Cable 1 AC Adaptor Cable
c c
3 iPod ® Dock Inserts 1 Universal MP3 Player Dock Insert
c c
2 Crank Caps 10 Hardware Bags
c c
1 iPod ® Docking Station Plug
c
BOLT (A)
20 mm
Qty: 8
ASSEMBLY STEP 1
HARDWARE BAG 1 CONTENTS:
BOLT (A)
20 mm
Qty: 8
CONSOLE
ASSEMBLY STEP 1:
CONSOLE MAST
LOWER HANDLEBAR
MAIN FRAME
SIDE COVER
CRANK
CRANK CAP
ELBOW COVER
PEDAL ARM
LINK ARM
BASE RAIL
BASE RAIL
REAR UPRIGHT
A Open HARDWARE BAG 1.
B Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 4 BOLTS (A) and 4 WASHERS (B).
C Attach the BASE RAIL to the MAIN FRAME using 4 BOLTS (A) and 4 WASHERS (B).
WASHER (B)
20 mm
Qty: 8
WASHER (B)
20 mm
Qty: 8
MAIN FRAME
MAIN FRAME
BOLTS (A)
WASHERS (B)
WASHERS (B)
BOLTS (A)
BOLTS (A)
WASHERS (B)
FRONT STABILIZER TUBE
BOLTS (A)
WASHERS (B)

7/31/08 12:43:17 PM