ASSE MBLY STe P
NOTe: There is NO hardware bag for this step. All hardware is pre-installed.
A
Attach the eLBOW COVerS to the LOWer LiNK Arm using 3 Pre-ATTACHeD SCreWS.
B
Repeat on other side.
1
E1201_Rev.1.4.indd 16-17
ASSEMBLY STeP 10
PRE-ATTACHED SCREWS
ELBOW COVERS
LOWER LINK ARM
NOTe: There is NO hardware bag for this step. All hardware is pre-installed.
A
B
C
YOU'RE FINISHED!
CONSOLE WIRES
CONSOLE MAST
Attach the CONSOLe mAST wires to the CONSOLe wires.
Carefully tuck the CONSOLe mAST wires into the CONSOLe mAST before attaching the CONSOLe.
Attach CONSOLe to the CONSOLe mAST using the 4 Pre-ATTACHeD SCreWS (screws will have to be
removed from the console first).
DO NOT PiNCH WireS!
CONSOLE
PRE-ATTACHED SCREWS
1
7/29/08 10:37:47 AM