Horizon Fitness ELITE 2.1E User Manual page 12

1
A
STEP 1:
ATTACH FRONT TUBE.
Note: Make sure not to tighten bolts until all assembly
steps have been completely assembled and aligned.
3
C
U
G
STEP 3:
ATTACH CONSOLE MAST AND
CONSOLE MAST BOOT.
Note: Make sure to loosen the
water bottle screws in order to fit
the console cable through the
mast. DO NOT PINCH WIRES!
6
D
L
Q
STEP 6:
ATTACH LEFT & RIGHT FOOT
PADS TO FOOT PLATE/LINK ARM.
ATTACH PIVOTING FOOT PLATE
TO PEDAL ARM.
4
J
B
STEP 4:
ATTACH LEFT & RIGHT PEDAL
ARMS AND PEDAL ARM COVERS.
Note: Black 'Teflon' surface of W
should be facing the pedal arm.
7
G
Q
STEP 7:
ATTACH LEFT & RIGHT LINK
ARMS TO LEFT & RIGHT LOWER
HANDLE BARS.
2
V
STEP 2:
ATTACH LEFT & RIGHT GUIDE RAILS AND REAR RAIL-
STABILIZER.
Note: Make sure all the levelers are leveled.
F
W
H
R
S T
12
K
F
K
F
5
E
I
STEP 5:
ATTACH LEFT & RIGHT LOWER
HANDLE BARS TO CONSOLE
MAST AND ATTACH LEFT &
RIGHT UPPER HANDLE BARS.
ATTACH H-BAR COVERS.
Note: Bolts and washers are pre-
assembled.
8
STEP 8:
ATTACH CONSOLE AND CON-
NECT ALL WIRES.
Note: DO NOT PINCH WIRES!
Note: Bolts are pre-assembled to
console.
V