On-Screen Service Menu System - Sanyo LCD-32XL2 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu system included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
1) How to enter the Service Menu
Press and hold the SOUND button of the remote control and press the CHANNEL DOWN (P ) button on the front
control panel of the TV, and the Main menu of service mode will be displayed.
Software Version
Information
Service Section
Important Notice:
2) How to select the service section and service item and change data value:
To select Service Section: Press the Cursor
To change data value: Select service item by pressing the Cursor
3) Exit from the Service Menu
Press the MENU button repeatedly or turn off the TV set by pressing the Power ON/OFF button.
[ Main Menu of the Service Mode ]
Service
ue2b27v7.01s128
Sound
Video
O O t t h h e e r r
STV8216
TDA9886
STV2310
ADE3800
WSS
EEPROM Reset
Do not attempt to adjust service adjustments not listed on page 13-14, otherwise it may
cause loss of performance and for correct operation.
VOLUME + button to enter the Sub menu.
the VOLUME + or - button.
(To return to the Main menu, press the MENU button.)
P
Example;
55 White BalR
Item No.
or button on the remote control hand set, and press the
or
-11-
[Sub Menu]
Item
, and change data value by pressing
32
Data Value