Chassis Removal - Sanyo LCD-32XL2 Service Manual

Mechanical Disassembly

3. Chassis Removal

After removing Cabinet Back and Stand, detach Mounting Bracket by removing 4 screws, remove 8 screws of
Chassis base, remove 2 screws of ASSY, PWB, CONTROL, disconnect each connectors and the chassis can be
taken out.
ASSY, PWB, POWER
ASSY, PWB, CONTROL
How to Remove Flat Cable
There are following kinds of the connectors of flat cable. Be careful not to damage a connector in the case of removal of
a flat cable or attachment.
Type-A
Cable
Type-B
Cable
Fan Motor
ASSY, PWB, SCAL
For removal of flat cable, lift up the
hook of both sides.
For insert and fixing, hold down the
hook after inserting the flat cable.
For removal of flat cable, slide the
hook of both sides.
For insert and fixing, slide the hook
to previous position after inserting
the flat cable.
Mounting
Bracket
Type-C
Cable
Type-D
-17-
Chassis Base
ASSY, PWB, SIGNAL
ASSY, PWB, MTS
For removal of flat cable, pull off only.
For fixing, insert into the socket.
For removal of flat cable, hold down
the hook.
For insert and fixing, lift up the hook
after inserting the flat cable.
Speaker