Specifications - Sanyo LCD-32XL2 Service Manual

Specifications

Power Source AC100-240 Volts, 50/60Hz
Receiving System PAL-N/N/, PAL-M/M, NTSC-M/M
Channel Coverage ANTENNA mode
CATV mode
Aerial Input Impedance 75 Ω
LCD Panel
Screen Size (Measured Diagonally): 32 inches
Picture Resolution: WXGA 1366 (Horiz.) x 768 (Vert.) pixels
Viewing Angles: Horiz. 176˚, Vert. 176˚
Contrast Ratio: 1000:1
Brightness: 550 cd/m
Audio Output (RMS) 10W+10W
Speakers 6 cm x 12 cm x 2 pcs.
AV Terminals
AV1 Video: Composite video Input (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV2 CENELEC Standard (Scart Terminal)
Input: Composite video, RGB, S-video and audio-L/R
Output: Monitor-output with composite video and audio-L/R
AV3 Video: Composite video Input (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV4 Video: Composite video Input (RCA Jack) x 1
Audio: L/R Stereo Input (RCA Jack) x 1 set
AV5 Video: Component Y, C
Audio: L/R Stereo Input (RCA Jack) x 1 set
Audio Monitor Output: L/R Stereo Output (RCA Jack) x 1 set
Headphone Jack: Mini Stereo Jack x 1
Dimensions: 922 (W) X 545 (H) X 233 (D) mm (Included Tilt Stand)
Weight 17.5 kg (Included Swivel Stand)
Specifications subject to change without notice.
VHF: CH02 - CH13
UHF: CH14 - CH69
VHF band: CH01-CH13
MID band: CH14-CH22
SUPER band: CH23-CH36
HYPER band: CH37-CH64
ULTRA band: CH65-CH94 and CH100-CH125
Low MID band: CH95-CH99
2
,C Input (RCA Jack) x 1 set
B R
-3-