Table of Contents
Advertisement
On-screen Service Menu System
General
This set has an On-screen Menu system included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1. Press and hold the MENU button on Side Controls.
2. Keep pressing the MENU button and press
MENU will be displayed.
Side Controls
OK
MENU button
Open or close the On-Screen Menu.
[ Service Mode Menu ]
Service Mode
V1.280312UH4B42HD
Source
HDMI1
Properties:
BrightnessOffset
Date:
0
■ How to select the service item and adjust data:
To adjust data:
1) Select "DATA" line by pressing
Service Mode
V1.280312UH4B42HD
Source
HDMI1
Properties:
BrightnessOffset
Date:
0
2) Press ◄►button to adjust data.
■ To exit service mode
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
6
"1"
button on the remote control, and the FACTORY
Version No.
Input Source
Item Name
Data Value
▲
or ▼button.
Hide quick links:
Advertisement
Table of Contents
