Simulation; List; Details Of Trouble Code - Sharp MX-CFX1 Service Manual

[9] SIMULATION

MX-CFX1

1. List

Code
Main Sub
Used to check the operations of the sensors and detectors in the inserter and the
30
control circuits.
3
31 Used to check the operations of the loads in the inserter and the control circuit.
32 Used to set the adjustment value of the inserter paper width detection level.

2. Details of trouble code

3
3-30
Purpose Operation test/Check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the inserter and the
control circuits.
Section Inserter
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted.
TH_SEN Inserter sub tray pull-out detection
TS_SEN Inserter sub tray storage detection
T_SEN Inserter tray paper length detection
EMP_SEN Inserter tray empty detection
REG_SEN Inserter resist detection
TIM_SEN Inserter timing detection
JCK_SEN Inserter JAM cover open/close detection
H_SEN Inserter reverse detection
HI_SEN Inserter paper exit detection
HYK_SEN Inserter reverse unit open/close detection
P_ST_SW Inserter start SW
P_MO_SW Inserter staple mode select SW
P_PN_SW Inserter punch select SW
SET_SW Inserter set SW
SIMULATION NO.03-30
TEST
FIN SENSOR CHECK
TH_SEN
TS_SEN
REG_SEN TIM_SEN
HI_SEN
HYK_SEN
P_PN_SW SET_SW
Function (purpose)
CLOSE
T_SEN EMP_SEN
JCK_SEN H_SEN
P_ST_SW P_MO_SW
1/1
MX-CFX1 SIMULATION 9 – 1
Service Manual
Operation test/Check
Operation test/Check
Setting (Adjustment)
3-31
Purpose Operation test/Check
Function (Purpose) Used to check the operations of the loads
in the inserter and the control circuit.
Section Inserter
Operation/Procedure
1) Select a target of the operation check with the touch panel.
2) Press [EXECUTE] key.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
K_MOT Inserter paper feed motor
Y_MOT Inserter horizontal transport motor
H_MOT Inserter reverse motor
F_SOL Inserter flapper solenoid
R_CL Inserter resist clutch
P_LED Inserter operation panel upper LED
SIMULATION NO.03-31
TEST
INSERTER LOAD CHECK
K_MOT
H_MOT
R_CL
Purpose Section
Inserter
Inserter
Inserter
CLOSE
Y_MOT
F_SOL
P_LED
EXECUTE
1/1