Simulation; Entering The Simulation Mode; Cancelling The Simulation Mode - Sharp AR-PB8 User Manual

[5] SIMULATION

1. Entering the simulation mode

Perform the following procedure to enter the simulation mode.
Clear key Interruption key
code Start key Sub code

2. Cancelling the simulation mode

When the all clear key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and
the screen returns to the sub code entering display.
3. Contens of Simulations
Main Sub
Contents
code code
22 18 Printer counter display
24 9 Printer counter clear
67 14 Printer Flash ROM
Data Download
1: Each counter display method
To display 123456: 123 (0.75 sec)
2: Display after clearing each counter
000 (0.75 sec) Blank (0.35sec)
"0" key Interruption key Main
Start key
Used to display the current printer counter value. 1
Used to clear the printer counter. 2
The machine enters the version up mode of the printer PWB flash ROM.
For details, refer to the printer PWB flash ROM version up procedure
described later.
Blank (0.35sec) 456 (0.75 sec)
000 (0.75 sec) Blank (1.0 sec)
Details of operation
Blank (1.0 sec) repetition
Repetition
5 – 1
AR-PB8
Initial
Set range
value