Adjusting The Height And The Viewing Angle; Prolite Xub2390Hs / Prolite Xub2790Hs; Panel Rotation : Prolite Xub2390Hs / Prolite Xub2790Hs - Iiyama ProLite XU2290HS User Manual

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :

ProLite XUB2390HS / ProLite XUB2790HS

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 20
degrees upward and 4 degrees downward.
 Do not touch the LCD screen when you
NOTE
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
 Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.

PANEL ROTATION : ProLite XUB2390HS / ProLite XUB2790HS

A Adjust the mother's height.
B Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
 Attempting to rotate without fully extending
NOTE
upward may cause damage to stand.
 Video card for portrait display will be
required for rotating the image on the
screen.
C Adjust the monitor's angle to your preference.
45°
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 13
130mm
45°
90°