Table of Contents
Advertisement
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2390HS / ProLite XUB2790HS
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 20
degrees upward and 4 degrees downward.
NOTE
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
45°
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 17
130mm
45°
Advertisement
Table of Contents
