Computer Setting; Adjusting The Height And The Viewing Angle; Panel Rotation - Iiyama G-MASTER GB2760QSU-B1 User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up
to 130mm, angle up to 45° right and left, 22°
upward and 5° downward.
NOTE
 Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
 Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.

PANEL ROTATION

Adjust the monitor's height.
Rotate the panel 90°.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
NOTE  Attempting to rotate without fully extending
upward may cause damage to stand.
 Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor's angle to your preference.
45°
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 9
130mm
45°
90°