FITTING AND REMOVAL OF BASE : ProLite XU2290HS / ProLite XU2390HS
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Install the stand-base to the stand.
Use 'thumb screw' provided to secure base to monitor column.
Insert the Cable Holder into Hole.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
Stand-Base
Thumb screw
for Stand-Base fi xing
Cable Holder
BEFORE YOU OPERATE THE MONITOR 7
Stand-Base