White Balance Red (Vwr) - Panasonic RS-232C Protocol Manual

5.89 White Balance Red (VWR)

Name
Syntax
Function
Parameters
Response
Interrupt Processing
Examples of Use
Notes
Projector Model to Command Compatibility
Model PT-L711U
Number PT-L711XU
Command
Acceptance
(Yes if Command can be used, No if command cannot be used)
Panasonic
White Balance Red
[STX]VWR:p1p2p3[ETX]
This command will adjust the Red level to achieve
White Balance..
000 – 063 White Balance Adjustment Range
[STX]VWR[ETX]
The Projector must be powered on for this command to
be effective.
[STX]VWR:031[ETX]
This adjustment is for RGB only. Adjust the Red signal
up or down, so that the white portions of the screen
appear white.
PT-L701U
PT-L701XU
Yes Yes
PT-L701SDU
PT-L511U
PT-L701XSDU
PT-L511XU
Yes Yes
102 102
for LCD Projector
PT-L501U
PT-L501XU
Yes
RS-232 Protocol