Picture Menu; Picture Mode; Contrast; Brightness - Panasonic PT-F300EA Operating Instructions Manual

PICTURE menu

Remote control
See "Navigating through the menu" on page 34.
See "Main menu and Sub-menu" on page 32.

PICTURE MODE

Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
STANDARD Setting for a general image
DYNAMIC Bright and sharp setting
Setting for when projecting on
BLACKBOARD
a blackboard
Reproduces the original colour
*1
NATURAL
of the image
Setting for a cinema type
*2
CINEMA
movie
*1. Selectable when sill image is displayed.
*2. Selectable when moving image is displayed.
NOTE:
• It may take for a while until the image stabilised in the
selected mode.

CONTRAST

You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Lower

BRIGHTNESS

You can adjust the brightness of the projected image.
Darker
Control panel
Higher
Brighter

COLOR

You can adjust the colour saturation of the projected
image. (Available with VIDEO/S-VIDEO/YP
movie/DVI movie signals only)
Lighter

TINT

You can adjust the skin tone in the projected image.
(Available with VIDEO/S-VIDEO/YP
DVI movie signals only)
More
reddish

SHARPNESS

You can adjust the sharpness of the projected image.
Less
sharp

WHITE BALANCE RED

You can adjust the white balance more properly in red
colour temperature by pressing I H. (Available with
RGB/DVI still signals only)

WHITE BALANCE GREEN

You can adjust the white balance more properly in green
colour temperature by pressing I H. (Available with
RGB/DVI still signals only)

WHITE BALANCE BLUE

You can adjust the white balance more properly in blue
colour temperature by pressing I H. (Available with
RGB/DVI still signals only)
P /RGB
B R
Darker
P /RGB movie/
B R
More
greenish
More
sharp
E
NGLISH - 35