[Color Temp.]; White Balance ([Red]/[Green]/[Blue]); [Offset]; [Auto Picture Control] - Panasonic PT-EX16KE Operating Instructions Manual

[Image adjust] menu

[Color temp.]

1) Press ▲▼ to select [Color temp.].
2) Press the <SELECT> button.
■
z The advanced menu is displayed.
■
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation
Makes the color
Press ▶ .
temperature
higher.
Makes the color
Press ◀ .
temperature
very low.
Note
z [XLow] (emphasize red) - [High] (emphasize blue)
z Note that adjusting this item will also change the
white balance setting.
z [Adj.] is displayed when you adjust the white
balance (any of [Red], [Green], and [Blue]).
White balance ([Red]/[Green]/
[Blue])
1) Press ▲▼ to select [Red] (or [Green]
or [Blue]).
2) Press the <SELECT> button.
■
z The advanced menu is displayed.
■
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation
Press ▶ .
Weakens the color.
Press ◀ .
Deepens the color.
52 - ENGLISH
Adjustment Range
[XLow]-[Low]-
[Mid]-[High]
Adjustment Range
Maximum
value 63
Minimum
value 0

[Offset]

1) Press ▲▼ to select [Offset].
2) Press the <SELECT> button or ▶ .
■
z The sub menu 2 is displayed.
3) Press ▲▼ to select [Red] (or [Green]
or [Blue]).
4) Press the <SELECT> button.
5) While looking at the screen, press ◀▶
to adjust the setting.
[Red] Minimum value 0 - maximum value 63
[Green] Minimum value 0 - maximum value 63
[Blue] Minimum value 0 - maximum value 63

[Auto picture control]

Emphasizes the dark parts of the projected image.
1) Press ▲▼ to select [Auto picture
control].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
■
z The setting will change as follows each time
you press the button.
[Off] [L 1]
■
z The effect is strongest with [L 2].

[Advanced color]

Sets the operation of the color control device that
independently controls the quantity of yellow light.
1) Press ▲▼ to select [Advanced color].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
■
z The setting will change as follows each time
you press the button.
[Off]
■
z The white balance may change depending on
the image.
[L 2]

[Auto]