1
6. SERVICE MODE
6.1 TEST MODE
A
USB Test Mode
1 Reset is executed pressing the [EQ] key and the [MUTE] key.
2 Assuming the USB test terminal (57 Pin) as H transfers to the USB test mode.
The system operates on its own, and it is the mode capable of tracking it up by inputting the track up terminal (58 Pin).
The content includes the following:
Switched to the USB source in transition of the test mode.
Operable without monitor connection during the test mode.
Sound is output as usual in transition of the USB source.
B
Track up is possible by assuming the track up terminal as H.
Note: Although this specifications do not usually allow the USB source to turn ON when connecting the iPod,
it can be turned ON only in the USB test mode.
[Cancel Conditions]
Product reset
Turning ACC ON
[Operating Conditions]
In detach off (including the case where the TUNER pack is not connected): Inoperable
In DVD not connected (excluding rising time-out for 10 seconds): Operable
In FLAP mechanism not connected: Operable
C
Monitor not connected: Operable
Display Microcomputer Version
Reset is executed pressing the [EJECT] key and the [SOUCE] key.
Transmit the [1] key with the remote controller after transition of the menu.
This displays the software version of each microcomputer.
[Cancel Conditions]
Product reset
D
Turning ACC ON
[Operating Conditions]
In detach off (including the case where the TUNER pack is not connected): Inoperable
In DVD not connected (excluding rising time-out for 10 seconds): Operable
In FLAP mechanism not connected: Operable
Monitor not connected: Inoperable
E
F
64
1
2
AVH-P5150DVD/XN/RC
2
3
3
4
4