Table of Contents
Advertisement
3
Frame
• Fit the cowling assembly into the front end of the frame.
Hint: Squeeze the cowling assembly slightly (on each
side) to fit it inside the frame.
• Insert two #8 x
3
/
" screws into the front holes in the
4
cowling. Tighten the screws.
4
• Insert two #8 x
3
/
" screws into the frame, as shown.
4
Tighten the screws.
Assembly
5
Cowling
Assembly
• Turn the frame on its side.
• Insert four #8 x
of the frame and into the cowling assembly. Tighten
the screws.
6
Front of
Frame
• Turn the frame upright.
• Position the steering tube so that the curve faces the
front end of the frame.
• Fit the ends of of the steering tube into the holes in the
frame on either side of the cowling.
9
Bottom View
3
/
" screws into the holes in the bottom
4
Steering Tube
Curve Faces
Front End
of Frame
Advertisement
Table of Contents
