Power Wheels GT Racer Kart Owner's Manual With Assembly Instructions page 13

Assembly
19 21
Seat
Assembly
• Slide a 3 / " washer onto two #8 x 3 / " screws.
16 4
• Insert the #8 x 3 / " screws with washers through the seat
4
and into the wing. Tighten the screws.
Hint: The wing is designed to be adjustable. Please refer
to the Hot Wheels ™ Racing Guide for information on how
to adjust the wing.
• Fit the seat assembly into the frame.
20
• Insert six #8 x 3 / " screws through the seat and into
4
frame, as shown. Tighten the screws
13