Advertisement
Problem:
Loud pump noise.
Solution:
n Check to make sure the water reservoir
has been filled and inserted correctly.
Problem:
Not enough froth when frothing milk.
Solution:
n Steam nozzle or "Perfect Froth" clogged.
n Milk is not fresh.
n Milk is not cold.
w The pitcher that you are using is not
suitable. It is recommended that you use
a stainless steel frothing pitcher.
n The type of milk is not suitable.
We recommend using 2% or skim milk.
Whole milk is acceptable, but due to the
fat molecules, it will not have as dense a
froth, as if you were to use 2% or skim
milk.
Problem:
Coffee does not flow out.
Solution:
H Make sure water reservoir is properly
filled.
n Check whether the water reservoir has
been properly inserted.
n The machine may need to be decalcified
(see section "Decalcifying').
H Brewing head may be clogged with old
coffee grounds.
. -----.-"__--
Your KRUPS #884 is covered by the
following warranty:
If within one year from date of purchase this
KRUPS product fails to function because of
defects in materials or workmanship,
KRUPS North America will, at its option,
repair or replace the unit without charge,
provided the owner has a proof of date of
purchase.
This warranty will be void if malfunction
was caused by damage to the product by
accident, misuse, use on frequency or
voltage other than marked on the product
and/or described in the instructions, abuse
including tampering, damage in transit, or
use for commercial purposes. This warranty
gives you specific legal rights, and you may
also have other rights which may vary from
state to state.
-_. _
15
Advertisement
