Advertisement
A
Caution:
If the water reservoir is empty and the pump
is running, you will hear a distinct noise,
which is louder than the normal operating
sound. Turn off the machine! Never let the
pump run when the water reservoir is
empty, as this can damage the pump.
Step 5
n To remove coffee from the filter basket,
remove the filter holder from the
machine. To remove the coffee cake from
the filter holder, press the auto-eject
button located on the handle and knock
out the espresso grounds (see figure 18).
Reinsert the filter holder back into the
machine to help keep it warm.
~~~a~
The memory function can be used to alter
the pre-programmed portions to make
"shorter" or "taller" amounts of espresso.
Once selected, the new portion will remain
in memory until the next time it is manually
changed.
Step 1
Turn ON the appliance as you would for
preparing espresso.
Insert the filter holder (with coffee) into the
brewing head. Place a cup under the filter
holder.
Once the red indicator light stops
flashing, press the M key. The M
indicator light will flash, while the
indicator lights for "one" and "two" cup
portions will remain constant
(see figure 19).
Press and hold in either the "one" Q
or "two" Sp selection until the
desired quantity of espresso is
dispensed (see figure 201.
Press the M key to store the new
programmed amount into memory
I.
(see figure 21
12
Your "Novo 4000 Programatic" machine can
be used to dispense hot water for tea,
cocoa, instant soup and other hot beverages
by using the steam/hot water nozzle (do not
use the "Perfect Froth" attachment for this
procedure).
Step 1
Make sure the reservoir is filled with fresh,
cold water.
Turn the rotary dial to the 0 position and
turn the machine ON. When the red
indicator light stops flashing, swing out the
steam/hot water nozzle (f) and place a cup
under the nozzle.
n Press the HB: button and turn the rotary
dial to the .$J position (see figure 22).
When you have reached the desired
quantity of hot water, turn the rotary dial
back to the 0 position.
Note: If you do not turn the rotary dial to
activate the hot water function within 2
minutes, the machine will automatically
reset to the normal operating mode.
Once you have removed the cup from under
the steam/hot water nozzle, swing the nozzle
inward, over the drip tray to catch any
excess water.
A
Exercise caution when using the
steam nozzle, it is very hot!
In addition to preparing coffee and
espresso, you can also use your "Novo 4000
Programatic" machine to froth milk for
cappuccino. Cappuccino is traditionally
served in a 5 oz. cup consisting of l/3
espresso, l/3 steamed milk, topped with l/3
froth.
n For best results, you should use the
included KRUPS patented 'Perfect Froth'
attachment (see figure 23).
Advertisement
