Note: Follow the disassembly procedure in the numerical order given.
2-1. CASE (UPPER) REMOVAL
2 Remove the case (upper)
in the direction of the arrow.
2-2. CHASSIS (UPPER) REMOVAL
3 Chassis (upper)
1 Two screws
(B3)
SECTION 2
DISASSEMBLY
2-3. AU-222 BOARD REMOVAL
1 Two screws
(B3)
5 Two flat cables
(CN301, 302)
2-4. CASE (LOWER) REMOVAL
2 Two screws
(B3)
2-1
4 AU-222 board
1 Two connectors
(CN303, 306)
3 Remove the case (lower)
in the direction of the arrow.
DVP-F11
3 Two screws
(B3) (ring)
2 Five screws
(B3)
1 Two screws
(B3)
2 Four screws
(B3)